Side by side
| Polypropylene privacy strips | PVC privacy slat kit | |
|---|---|---|
| Fits | 2D and 3D panels on a 200 mm mesh | 3D panels on a 55 mm mesh |
| How it goes in | Threaded through the mesh by hand, without tools | Slats set vertically, held by clips, closed by a top profile; by hand |
| Lines | Orange Skin · Classic Line · Vision Line | — |
| References | 546 | 14 |
| Strip height | 44 – 190 mm | — |
| Format | 26 m roll · 36 m roll · 50 m roll · 60 m roll + 100 clips · 1 × 2535 mm · 10 × 2535 mm | — |
| Thickness | 0.7 – 1.55 mm | — |
| Panel height | — | 1.03 – 2.03 m |
| Panel length | — | 2.5 m |
| Colours and finishes | RAL 6005 · RAL 7016 · RAL 7035 · RAL 7040 · RAL 9005 · RAL 9010 | RAL 1015 · RAL 6005 · RAL 7016 |
| Material | Polypropylene (PP) | PVC |
Catalogue as of 1 October 2026
Polypropylene strips
Strips are extruded polypropylene, threaded through the panel by hand, without tools and without changing the panel. They fit double-wire and single-wire panels on a 200 mm mesh, so the 2D and the 3D panel both take them.
There are three lines, in the same colours. Orange Skin is the pearl-textured strip in the thin gauges; Classic Line and Vision Line are the heavier ones, and Vision Line is ribbed on both faces. Strips are sold by the roll, as a roll of ten cut pieces, or as a single strip cut to 2,535 mm — one panel’s worth — and the format decides which gauges are made. A roll is one colour throughout; two colours can be combined in a panel, row by row.
The PVC slat kit
The kit is made for 3D panels on a 55 mm mesh. Flat PVC slats run vertically between the panel’s horizontal wires, clips hold them against the mesh and a profile closes the top. Nothing is screwed, drilled or glued, so a run can be filled after the fence is standing, and the kit can be taken out again.
It is sold by the panel, not by the metre: one kit is the slats, clips and profiles for one 2.50 m panel at one height, in one box.