Side by side
| 3D fence panel | 2D double-wire panel | |
|---|---|---|
| Construction | Single wire, stiffened by horizontal folds | Flat, two horizontal wires around each vertical |
| Post | Notched post | Post 40 × 60; corner post 60 × 60 |
| Fixing | Drops into the notches; no clip | Clip and bolt through the post; a flat bar on each post |
| Gates | Pedestrian gate, 3D infill | Pedestrian gate 8/6/8; swing gates EIFFEL (8/6/8) and CORBUSIER (6/5/6) |
| Privacy | PVC slat kit, or polypropylene strips | Polypropylene strips |
| References | 160 | 82 |
| Height | 0.63 – 2.43 m | 0.63 – 3.00 m |
| Length | 2.50 m | 1.25 m · 2.50 m |
| Wire | 4/4 mm · 4.5/4.5 mm · 5/4 mm · 5/5 mm | 6/5/6 mm · 8/6/8 mm |
| Mesh | 55 × 200 mm | 50 × 200 mm |
| Colours and finishes | RAL 6005 · RAL 7016 · RAL 9005 · RAL 9010 | RAL 6005 · RAL 7016 · RAL 9005 · RAL 9010 |
| Finish | Polyester powder coating over galvanising, 40–60 g Zn/m² | Polyester powder coating over galvanising, 40–60 g Zn/m² |
Catalogue as of 1 October 2026
How each panel is made
The 3D panel is a single-wire welded panel. Its stiffness comes from its shape — horizontal folds across the sheet — rather than from the section of the wire. All of its wire gauges share one mesh and one panel length.
The 2D panel is flat. Each horizontal is a pair of wires, one on each side of the vertical wire, which is where the names 8/6/8 and 6/5/6 come from: two horizontal wires of 8 mm around a 6 mm vertical, or 6 mm around 5 mm. In the UK the same panels are sold as 868 and 656 twin wire mesh.
Posts and fixing
A 3D panel drops into the notches of the notched post: no clip, nothing drilled on site. A 2D panel is fixed to the 40 × 60 post with a clip and a bolt through the post, and a drilled flat bar goes with each post, so a run can be set out before a single panel is lifted. The corners of a 2D run take the 60 × 60 corner post.
Gates and privacy
Each panel has its gates. A 3D run takes the pedestrian gate with 3D infill. A 2D run takes the pedestrian gate with 8/6/8 infill and the two swing-gate lines: EIFFEL with 8/6/8 infill, CORBUSIER with 6/5/6. For privacy, the 3D panel takes the PVC slat kit, cut to the panel height; polypropylene strips thread into both panels.